Drywall Installation in Etobicoke

New Drywall Installation

New drywall installation starts with a site review and material confirmation before any board is ordered. Our Drywall Installation service includes hanging boards to the correct fastening schedule, placing seams away from corners and stress points, and backing all panel ends to help prevent joint cracking. In residential new construction and major renovation projects, we coordinate with the framing crew to confirm the walls are ready before hanging begins. A wall that is not plumb or square adds time and cost at the finishing stage, so we identify those issues early.

Drywall Repair & Patching

Drywall damage in Etobicoke homes comes from a range of causes: water intrusion, pest activity, structural movement, or simply the wear that accumulates in a home over decades. We handle repairs of all sizes, from small hole patches to full section replacements following water damage remediation.

The part of a repair that takes the most skill is the finish. Matching the existing texture, blend, and sheen level requires experience and the right technique. We assess the existing surface before we start, replicate the texture application method, and deliver a patch that blends into the surrounding wall.

Drywall Taping & Mudding (Finishing)

Taping and finishing is where the quality of a drywall installation becomes visible, and where shortcuts show up under paint. Our Drywall Taping & Finishing service focuses on creating smooth, durable joints that are ready for the final paint or wall finish. We apply paper tape embedded in setting compound on all flat seams. Paper tape, when properly embedded and feathered, produces a stronger and flatter joint than fiberglass mesh, which is why we use it as our primary tape on seams.

Subsequent coats are feathered progressively wider, typically 150 mm, 200 mm, and 250 mm, to eliminate visible ridges at the tape edge. Inside corners are taped and detailed. Outside corners receive metal or vinyl bead, fastened and coated. Screw heads are filled at every coat. We finish to the Gypsum Association GA-214 standard at the level specified for the project.

Ceiling Drywall Installation

Ceiling drywall installation requires a different approach than walls. Board is heavier to manage overhead, and sag is a real risk if fastening is not done correctly. We use screw patterns confirmed to the board thickness and the ceiling joist or framing spacing.

In basements with steel framing and concrete above, the fastening strategy changes entirely, and we adjust accordingly. For ceilings that will be painted with flat paint under normal lighting, a Level 4 finish is standard. For ceilings in spaces with critical or raking light, we deliver a Level 5 skim that eliminates surface variation visible under those conditions.

Basement Drywall Installation

Basements present the most demanding conditions for drywall work in an Etobicoke home. Moisture vapor transmission through concrete is a constant reality, even in well-waterproofed foundations. Standard gypsum board with a paper face is not the right material below grade. We use moisture-resistant fiberglass-faced board, such as USG Sheetrock Mold Tough or CGC equivalent, rated to ASTM D3273 for resistance to mold growth on the board surface.

Combined with metal stud framing, which removes organic material from the wall cavity entirely, the wall assembly we build in a basement is designed to perform long-term without the moisture-related failures that plague poorly specified basement finishes.

We also confirm that any active water intrusion in the basement is addressed before framing and board go up. Installing drywall over a wet foundation does not solve a moisture problem. It hides it until the damage is severe enough to require a full teardown.

Commercial Drywall Services

Commercial drywall work in Etobicoke requires an understanding of fire-rated assembly requirements, coordination with other trades, and delivery on commercial project timelines. We work on office build-outs, retail tenant improvements, healthcare clinics, and multi-unit residential projects across the district.

Commercial projects often require specific UL or CAN/ULC rated wall assemblies where the board type, stud gauge, fastening pattern, and overall assembly must match the tested design exactly. We install to those specifications and prepare the work for municipal inspection at the framing and rough-in stage.